Operating Manual
8.5.3
Reset using tweezers
Kaba mechatronic cylinder compact
The e-module has INI reset contacts.
To perform an INI reset, short-circuit these contacts
with electrically conductive tweezers.
1. Remove [} 4.2.3] the knob.
2. Locate both contacts on the e-module.
3. Using the tweezers, short-circuit the INI reset contacts for approx. 3 s.
ð Two acoustic signals sound to indicate that the INI reset was successful.
k1evo820 - 201606
Service
Round profile
33