Variant With Wireless Module; Installing The Wireless Module - Kaba 1546-K5 Operating Manual

Service
8.3

Variant with wireless module

8.3.1

Installing the wireless module

30 Round profile
NOTICE
Prevent damage to the pin header and wireless module.
Position the wireless module with the pin header parallel to the e-module, so that
the pin header and wireless module are not damaged.
ü Knob removed
ü Adapter, e-module and flat ribbon cable are installed [} 4.2.6]
1. Lay the flat ribbon cable in loops.
2. Align the wireless module as shown.
3. Carefully press the wireless module against the flat ribbon cable and e-module.
4. Insert the wireless module.
5. Push the cover approx. 1 cm onto the wireless module.
6. Insert the cover into the guide track of the e-module.
k1evo820 - 201606
Operating Manual
Kaba mechatronic cylinder compact