Intec FORCE/2 Instruction Manual page 24

Hide thumbs Also See for FORCE/2:

Table of Contents

THE FORCE/2

Maintenance, Cont.

Recommended gearbox oil:

Model 22014

Capacity: 48 oz.

Temperature 40˚ - 100˚ F Mobil SHC 634 gear lube

Temperatures -20˚ - +40˚ F Mobil 1 synthetic 5W-30

Drain & Fill plug

Gearbox/Agitator/Airlock Unjamming procedure: Empty hoper,

disconnect all electrical cords to machine. Tip machine upside down onto hopper.

Remove agitator motor cover on outside of machine (black plastic). Locate and

remove fan cover on agitator motor. Note: Depending upon the motor used it will

be necessary to remove the screws holding the fan cover on before removal,

otherwise all other covers may be pried off using screwdriver. By hand, carefully turn

fan blade counter-clockwise until jam is cleared. Note: It will take approximately 15

turns of the fan blade before you start to reverse the entire airlock system. Caution!

Fan blade may break if excessive force is used.

Note: The gearbox and the airlock must be perpendicular to each other. Proper

alignment prevents premature wear on the gearbox and airlock shaft connection.

Removing Cover

Rotation Label

Model 22014

⁄

Turn by hand

Using Screw Driver

Vent Plug

Turn to Vent

Table of Contents

Show Quick Links

Table of Contents