Intec FORCE/2 Instruction Manual page 12

THE FORCE/2
How the System W orks T ogether , Cont.
REMOTE CONTROL:
Permanently attached to the main panel, the remote
control cord allows the operator to control the machine's
on/off function from the attic. Both the agitator and the
blower can be operated independently by the remote
control. The blower speed control is built into the remote
cord to enable the operator to decrease or increase blower
pressure and air volume.
DETACHABLE REMOTE
The remote cord must be attached at all times in order
for the machine to operate. To connect, locate the keyed
positions on both the receptacle (Electrical panel) and
connector on remote cord. Insert connector into
receptacle and turn clockwise until it clicks in. To lock
remote cord into receptacle, turn blue outer ring on
remote cord connector and turn clockwise until it stops.
Align, Push in and Twist Turn outer Ring
10
Remote Control
with VS Control
Remote Control
with Disconnect