Axis 2N LTE Verso Configuration Manual page 110

Touch keypad & RFID reader 125 kHz, 13.56 MHz
13.56 MHz (125 kHz) Card Reader (serial number)
Module Name – set the module name for card reader logging purposes.
Door – set the reader direction (Not specified, Arrival, Departure) for the
Attendance system purposes.
Associated Switch – set the switch to be activated after user authentication via
this module. If you set Door Lock Switch, the authentication rules specified in
Hardware / Door will be used.
2N TELEKOMUNIKACE a.s., www.2n.cz 110/211