Table of Contents
Advertisement
5.2.3.6
"Cancel Proprietary Track/Proprietary Motion Activated Track" command
This command is used to terminate a Proprietary Track or Proprietary Motion Activated session.
Byte
0
1
2
3-4
Example Command:
AA 05 32 48 D6
Byte
0
0 - 7
1
0 - 7
2
0 - 7
3 -4
0 - 15
Example Response:
AA 05 32 48 D6
5.2.3.7
"Send Redundant Burst with GPS" command
This command is used to initiate a redundant bursted message (as setup in STX configuration). Bytes 1 – 6 of the first
packet of the message shall contain latitude and longitude in standard Globalstar 24-bit format. Since each on-air
message must be a multiple of 9 bytes, the message will contain up to 15 9-byte packets depending on the size of the
payload.
Revision 1.0
09/30/15
Revision 1.0
Cancel Proprietary Track command format
Bits
Parameter
0 - 7
Leader
0 - 7
Length
0 - 7
Command Code.
0 - 15
CRC
Leader
Len
AA
05
Cancel Proprietary Track response
Bits
Parameter
Leader
Length
Command Code.
CRC
Subject To Change without Notice
STINGR Users Manual
Description
Always a value of 0xAA.
0x05
0x32 = cancel proprietary track.
Cmd
CRC1
CRC2
32
48
D6
Description
Always a value of 0xAA.
0x5
0x32 = ACK or 0xFF = NAK
P a g e
| 30
Advertisement
Table of Contents
