Setup (0X06); Query Setup (0X07) - Globalstar STINGR User Manual

Command: AA 05 05 74 93
Response:
Leader Len
AA 7
Example Response: AA 07 05
Where the firmware version returned is:

5.2.2.6 Setup (0x06)

The Setup command requests the STINGR to use the specified setup parameters. These are stored in non-volatile
memory.
0x06
Command:
header len 04 RESERVED
AA 0E 06 XX XX XX XX
Where:

RF channel :

# of bursts:

Minimum Burst Interval:

Maximum Burst Interval:
Example Command: AA 0E 06 00 00 00 00
Where the setup information is:

RF channel :

# of bursts:

Minimum Burst Interval:

Maximum Burst Interval:

5.2.2.7 Query Setup (0x07)

The Query Setup command requests the STINGR to return the current setup parameters.
Revision 1.0
09/30/15
Revision 1.0
4 FW major FW minor
5 XX XX
01 07 E0 6A
1.7
RF channel # of Bursts Interval Min Interval Max RESERVED CRC1 CRC2
XX XX
Valid values are: 0 = Channel A, 1 = Channel B, 2 = Channel C, 3 = Channel D
Valid values are: 0x01 thru x14 (1 to 20 bursts)
Units of 5 seconds. Valid values are: 0x01 thru 0x3C (5 to 300 seconds)
Units of 5 seconds. Valid values are: 0x02 thru 0x78 (10 to 600 seconds)
00 03 18 30
00 Channel A
03 3 bursts per message
18 0x18 = 24, 24 x 5 = 120 seconds
30 0x30 = 48, 48 x 5 = 240 seconds
Subject To Change without Notice
STINGR Users Manual
CRC1 CRC2
CC CC
XX XX
00 CE 9C
XX CC CC
P a g e | 20