Globalstar STINGR User Manual page 25

The following table summarizes the standby mode supply current for different modes
Operating Mode
Continous Tracking <= 30 minute interval
Continous Tracking > 30 minute interval
Motion Activated/Dock Tracking <= 30 minute interval
Motion Activated/Dock Tracking > 30 minute interval
Byte Bits
0 0 – 7
1 0 – 7
2 0 – 7
3 -4 0 - 15
5 0 - 7
6 0 - 7
7 0 - 7
8-9 0 - 15
Example Command: AA 0A 34
Where:

Period :

Payload Byte 0:

Payload Byte 7:

Payload Byte 8:
Revision 1.0
09/30/15
Revision 1.0
GPS Standby Mode + Standby mode supply current w/Accelerometer
Standby mode supply current w/Accelerometer
GPS Standby Mode + Standby mode supply current w/Accelerometer
Standby mode supply current w/Accelerometer
Proprietary Track command format
Parameter
Leader
Length
Command Code.
Interval
Byte 0 value
Byte 7 value
Byte 8 value
CRC
00 0A AA BB CC 3C 94
0x000A (10 minute intervals)
0xAA
0xBB
0xCC
Subject To Change without Notice
STINGR Users Manual
Standby Current
Description
Always a value of 0xAA.
0x0A (10 decimal)
0x34 = Initiate proprietary motion activated track.
Interval in minutes between the track points. MIN
and MAX allowed TBD.
The value to transmit as byte 0
The value to transmit as byte 7.
The value to transmit as byte 8.
P a g e | 25