Set Inputs/Count Notify Flags Via Configuration Service; Read Inputs/Count Notify Flags Via Configuration Service; Track Events Notification Settings; Set Track Events Notify Flags Via Nus, Uart - Globalstar ST150 User Manual

Table of Contents

Advertisement

9150-0125-01 R-4

Set Inputs/Count Notify Flags via Configuration Service

7.5.3
AT+CAPPNSF = < InputsCountNotifyFlags>

Read Inputs/Count Notify Flags via Configuration Service

7.5.4
AT+CAPPNSF?
Response
+ CAPPNSF: < InputsCountNotifyFlags>
Example:
To receive count modulus and input transition event notification, the valid command to activate notification
AT+CNSF = 40 (32+8).
To receive all Inputs/Count event notifications, the valid command to activate all notifications AT+CNSF = 2047.
To receive all Inputs/Count event notifications over configuration service, the valid command to activate all
notifications AT+CAPPNSF = 2047.
AT+CNSF = 2048 will return ERROR.
Configuring any reserved notification will return error.
7.6

TRACK EVENTS NOTIFICATION SETTINGS

Supported Track Event notifications code <TrackNotifyFlags>
TRACK_NOTIFY_FLAGS_UPDATE_TRIGGERED
TRACK_NOTIFY_FLAGS_RESERVED_1
TRACK_NOTIFY_FLAGS_RESERVED_2
TRACK_NOTIFY_FLAGS_RESERVED_3
TRACK_NOTIFY_FLAGS_LOCATION_ERROR
TRACK_NOTIFY_FLAGS_IN_GEOFENCE
TRACK_NOTIFY_FLAGS_OUT_GEOFENCE
TRACK_NOTIFY_TRACK_STATE_CHANGED

Set Track Events Notify Flags via NUS, UART

7.6.1
AT+TNSF = < TrackNotifyFlags>

Read Track Events Notify Flags via NUS, UART

7.6.2
AT+TNSF?
Response
+ TNSF: < TrackNotifyFlags>

Set Track Events Notify Flags via Configuration Service

7.6.3
AT+TANSF = < TrackNotifyFlags>

Read Track Events Notify Flags via Configuration Service

7.6.4
AT+TANSF?
Response
+ TNSF: < TrackNotifyFlags>
Example:
To receive Track in geofence and out geofence event notification, the valid command to activate notification
AT+TNSF = 6.
To receive all Track event notifications, the valid command to activate all notifications AT+TNSF = 96.
To receive all Track event notifications over configuration service, the valid command to activate all notifications
AT+TANSF = 255.
AT+TNSF = 256 will return ERROR.
Configuring any reserved notification will return error.
ST150M User Manual
=
1
=
2
=
4
=
8
=
16
=
32
=
64
=
128
Confidential & Proprietary Information
43

Advertisement

Table of Contents
loading

This manual is also suitable for:

St150m-devkit

Table of Contents