Air Line; Fluid Outlet Line - Graco SaniForce 2150 Operation Manual

Air Line

Line
Air Air Line
Models Models that Models that that Include Include a a a Compressor: Include Compressor: Compressor:
An air line is already connected from the compressor
to the pump air inlet.
Using Your Your Own Own Compressor: Compressor:
Using Using Your Own Compressor:
Install a grounded, flexible air hose from the
compressor to the pump air inlet (E).
Using Shop Shop Air: Air:
Using Using Shop Air:
1. Install an air filter/regulator assembly (H). The
fluid stall pressure will be the same as the setting
of the air regulator. The filter removes harmful
dirt and moisture from the compressed air supply.
Trapped air can cause the pump to cycle
unexpectedly, which could result in serious
injury from splashing.
3A5132K
2. Locate a master air valve (J) upstream from the
regulator (H). Use it to isolate the system during
cleaning and repair.
3. Locate a bleed-type master air valve (G) close to
the pump and use it to relieve trapped air. Be
sure the valve is easily accessible from the pump
and located downstream from the regulator (H).
4. Install a grounded, flexible air hose (F) between
the accessories and the pump air inlet.
Fluid Outlet Outlet Line Line
Fluid Fluid Outlet Line
1. Use flexible, grounded fluid hoses.
2. For best sealing results, use a standard tri-clamp
or DIN style sanitary gasket of a flexible material
such as EPDM, Buna-N, fluoroelastomer, or
silicon.
3. Install a fluid drain valve (L) near the fluid outlet.
4. Install a shutoff valve (M) in the fluid outlet line.
Installation
15