Maintenance - WAREMA WMS Transmitter Operating And Installation Instructions

Product type Functionality
Window
or press the button in the opposite
direction: The product stops
Short: The product moves to the
Long: The comfort position for the
Light
Short: The product switches to the
Long: The comfort position for the
Switching on/off the comfort control functions
When you have connected a push button to terminal A,
you can use it to switch on and off the comfort control
functions of the products in the channel of the WMS Trans-
mitter. If an additional push button is not connected, the
control control functions can also be switched on and off
by simultaneously pressing the UP and DOWN buttons.
Button/
Wction/result
display
Switching the comfort control functions on:
Briefly press the control button or the
and buttons simultaneously.
or
+
A short tone sounds to indicate that the

comfort control functions are switched on.
No tone: Not all receivers in the channel
were reached; repeat the proce-
dure.
Switching off the comfort control functions:
Press the control button or the
buttons simultaneously for approx. 2 s.
or
+
Two short tones sound to indicate that

the comfort control functions have been
switched off.
No tone: Not all receivers in the channel
were reached; repeat the proce-
dure.
890621_b•en•01.09.2014
Closing the product
Opening the product
stored comfort position
product is stored
Switch on the product
Change the product setting
(ON→OFF, OFF→ON)
Switch off the product
stored comfort position
product is stored
and
Learning/recalling the comfort positions
A comfort position can be stored for every receiver in the
network (e.g. awning half extended). The awning can be
automatically moved to this comfort position at the press
of a button.
Button/
Wction/result
display
Move the product in the channel of the
WMS Transmitter to the position that is
to be stored as the comfort position (see
Operating the products).
Hold down the comfort button for 5 sec-
onds.
A brief tone sounds to indicate that the

comfort position has been saved.
No tone: Not all receivers in the channel
were reached; repeat the proce-
dure.
To recall a comfort position:
Briefly press the comfort button.
The comfort position for the selected prod-

uct is restored automatically.
R ITE If a product is already in the comfort position or
if a comfort position has not been stored, the
selected product does not respond to pressing
of the comfort button.

Maintenance

There are no parts within the device that require mainte-
nance.
Liability
Failure to comply with the product information in these
instructions and use of the unit in a manner that contra-
venes its intended use and purpose may result in the
manufacturer refusing to honour warranty claims for
product damage. In this case, liability for secondary harm
to persons or damage to property will also be excluded.
Follow the instructions in the operating instructions of your
sun shading system. Liability is also excluded for damage
to the sun shading system resulting from operation under
icy conditions.
Disposal
After use, the device and the batteries must be disposed
of according to legal regulations or brought to your local
recycling centre.
We reserve the right to carry out improvements
5