Checking The Original Dimensions; Battery / Rechargeable Battery Operation - KERN HFA Series Operating Manual

4.3

Checking the original dimensions


Enter the original dimensions shown on the production data sheet in the grey
boxes of checklist chap. 9.3.

Check original dimension of suspended balance; for implementation see chap.
8.3 „Regular Maintenance"

Enter all data (date, tester, results) in the first line under „Inspection before first
use" in the checklist (see chapter 9.3)
If the dimensions of your first safety inspection do not match those
of KERN, the balance must not be put into operation. In this case
please contact a service partner authorised by Messrs. KERN.
CAUTION
4.4

Battery / rechargeable battery operation

Battery operation:
When batteries are empty,
Press and replace batteries.
Open battery compartment, replace batteries and close battery compartment again.
In order to save the battery, the balance switches automatically off after 4 minutes
without weighing. This auto-off function can be deactivated in the menu, see chap. 6.
When the suspended balance is out of operation for a longer period, remove the
batteries.
Unscrew battery / rechargeable battery
compartment in the direction of the
arrow.
Replace batteries and relock battery /
rechargeable battery compartment.
HFA-BA-e-1612
will appear on the balance's display
19