Table of Contents
Advertisement
7. Acknowledge by
8. Press
again, the currently set upper limit value is displayed. The active digit
is flashing. Press
To change the selected (flashing) digit, press
value is displayed.
9. Confirm entry by
10. Press
, the display used to set the audio signal "bEEP" will appear.
11. Press
, the current setting for the acoustic signal will be shown.
12. Select desired setting (bp 1, bp 2, bp 3) by
13. Press
repeatedly to exit menu. From here evaluation takes place whether
the goods to be weighed are within the two tolerance limits.
Start tolerance check:
Tare when using a weighing container.
Put on goods to be weighed, tolerance control is started. The signal lights indicate
whether the load is within the two set limits.
Load below specified
tolerance
The indicator [LO] appears The indicator [OK]
• The tolerance control is not active when the weight is under 20d.
• To delete limits, enter "0000 kg".
HFA-BA-e-1612
.
to select the digit to be amended.
, "Ck Hi" will appear.
Load within specified
tolerance
appears
repeatedly until the desired
and confirm by
.
Load exceeds specified
tolerance
The indicator [HI] appears
31
Advertisement
Table of Contents
