Huawei CloudEngine 7800 Series Hardware Description page 86

CloudEngine 7800&6800&5800 Series Switches
Hardware Description
Category 5 or higher category cable.
T Ethernet electrical port.
Table 2-9 Attributes of a 10/100/1000BASE-T Ethernet electrical port
Attribute
Connector
Standards
compliance
Applicable cable
Working mode
Maximum
transmission
distance
10GBASE-T Ethernet Electrical Port
A 10GBASE-T Ethernet electrical port receives and sends services at a speed of 100 Mbit/s,
1000 Mbit/s, or 10 Gbit/s. The port can work in 100/1000M mode through auto-sensing.
2-10
twisted pairs are recommended for the 10GBASE-T Ethernet electrical port.
Table 2-10 Attributes of a 10GBASE-T Ethernet electrical port
Attribute
Connector
Standards
compliance
Applicable cable
Working mode
Maximum
transmission
distance
10GE SFP+ Ethernet Optical Port
A 10GE SFP+ Ethernet optical port can automatically work in GE mode when it has a GE optical
module installed. A 10GE SFP+ Ethernet optical port can receive and send services when the
Issue 16 (2015-08-26)
Description
RJ45
IEEE802.3ab
Straight-through cable and crossover cable
Supported rate: 10/100/1000 Mbit/s auto-sensing
Full-duplex
100 m
describes the attributes of a 10GBASE-T Ethernet electrical port. Category 6A shielded
Description
RJ45
IEEE802.3an and IEEE802.3az
Straight-through cable and crossover cable
Supported rate: 100/1000 Mbit/s and 10 Gbit/s auto-sensing
Full-duplex
100 m
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Table 2-9 describes the attributes of a 10/100/1000BASE-
2 Chassis
Table
76