Dc Power Cable - Huawei CloudEngine 7800 Series Hardware Description

CloudEngine 7800&6800&5800 Series Switches
Hardware Description
Figure 5-2 Appearance of a C13 straight female to C14 straight male AC power cable
C13 straight
female connector
Connection
An AC power cable is connected to the AC power module of the device:
l The C13 straight female connector is connected to the power socket of a power module.
l The PI straight male or C14 straight male connector is connected to a power source.
When a
be connected to the power supply device using a C13 straight female to C14 straight male AC
power cable. This power cable is connected as follows:
l The C13 straight female connector is connected to the power socket of the
V DC power
l The C14 straight male connector is connected to a high-voltage DC PDU. If a high-voltage
DC power distribution box is used, make OT or cord end terminals for the cable. Cut the
C14 straight male connector off and crimp OT or cord end terminals on the bare wires.
Connect the blue wire to a positive terminal on the DC power distribution box, the brown
wire to a negative terminal, and the yellow-green wire to a protection ground.

5.2 DC Power Cable

Appearance and Structure
Figure 5-3
Issue 16 (2015-08-26)
600 W AC&240 V DC power module
module.
shows the appearance of a DC power cable.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
uses 240 V high-voltage power input, it must
5 Cables
C14 straight
male connector
600 W AC&240
162