Huawei CloudEngine 7800 Series Hardware Description page 45

CloudEngine 7800&6800&5800 Series Switches
Hardware Description
1
3
5
7
9
Issue 16 (2015-08-26)
Ground screw
Console port
Mini USB port
Fan slot 1
Applicable fan modules:
l FAN-060A series fan modules
Power supply slot 1
Applicable power modules:
l 600 W AC&240 V DC power module
l 600 W high-voltage DC power
module
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Two ETH management ports (combo)
Applicable transceiver modules for the GE
optical port of the combo port:
l FE optical module
l
GE optical module
l GE-CWDM optical module
NOTE
The combo optical port uses a 100M or GE
optical module and matching fibers. A 100M
optical module can be used only after the
switch starts successfully. If a 10GE optical
module is installed, the interface can go Up, but
the system displays an alarm message,
indicating that the interface does not support
the optical module. If a GE copper module is
installed and the remote interface has a GE
copper module installed, the local interface can
go Up but does not support rate configuration.
4
USB port
6 Barcode label
NOTE
This label is drawable, and you can pull it
outward to view the barcode and MAC address
of the switch.
8 Fan slot 2
Applicable fan modules:
l FAN-060A series fan modules
1 Power supply slot 2
0
Applicable power modules:
l 600 W AC&240 V DC power module
l 600 W high-voltage DC power
module
2 Chassis
35