Huawei CloudEngine 7800 Series Hardware Description page 73

CloudEngine 7800&6800&5800 Series Switches
Hardware Description
No.
7
8
9
Issue 16 (2015-08-26)
Indicator/Button
Service port indicator
(10GE electrical port)
NOTE
Arrowheads show the
positions of ports. A
down arrowhead
indicates a port at the
bottom, and an up
arrowhead indicates a
port at the top.
Service port indicator
(40GE optical port)
NOTE
Arrowheads show the
positions of ports. A
down arrowhead
indicates a port at the
bottom, and an up
arrowhead indicates a
port at the top.
40GE Breakout
1/2/3/4 (sequence
number indicators of
10GE ports converted
from a 40GE port)
NOTE
Indicators 1, 2, 3, 4 turn
on in cyclic order, with
each indicator keeping
on for 5s.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Color Description
Meanings of service port indicators vary in different modes.
For details, see Table 2-8.
Meanings of service port indicators vary in different modes.
For details, see Table 2-8.
When a 40GE port is configured as four 10GE ports, this
indicator shows the status of a 10GE port. The sequence
number of the indicated 10GE port is identified by indicators
40GE Breakout 1/2/3/4 on the lower right corner of the
panel.
NOTE
Each 40GE port has a single-color indicator, which shows the status
of the 40GE port by default.
If a 40GE port is not split and is connected to four 10GE ports on
a remote device using a one-to-four high-speed cable, the 40GE port
cannot go Up and its indicator is off.
- Off: 40GE ports are not split into four 10GE ports.
2 Chassis
63