Huawei CloudEngine 7800 Series Hardware Description page 82

CloudEngine 7800&6800&5800 Series Switches
Hardware Description
No.
7
8
9
10
Issue 16 (2015-08-26)
Indicator/Button
Service port indicator
(GE electrical port)
NOTE
The indicator on the left
indicates the port at the
top, and the indicator on
the right indicates the
port at the bottom.
Service port indicator
(10GE optical port)
NOTE
Each 10GE optical port
has two single-color
indicators. The one on
the left is the ACT
indicator (yellow), and
the one on the right is
the LINK indicator
(green).
Arrowheads show the
positions of ports. A
down arrowhead
indicates a port at the
bottom, and an up
arrowhead indicates a
port at the top.
Service port indicator
(40GE optical port)
NOTE
Arrowheads show the
positions of ports. A
down arrowhead
indicates a port at the
bottom, and an up
arrowhead indicates a
port at the top.
40GE Breakout
indicators 1/2/3/4
(10GE ports
converted from a
40GE port)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Color Description
ID Steady on: The indicator identifies the device for
indicat maintenance. The ID indicator can be turned on or
or: off remotely to help field engineers find the device
blue to maintain.
The meaning of the service port indicators varies according
to the current mode. For details, see
The meaning of the service port indicators varies according
to the current mode. For details, see
When a 40GE port is configured as four 10GE ports, this
indicator shows the status of a 10GE port. The sequence
number of the indicated 10GE port is identified by indicators
40GE Breakout 1/2/3/4.
NOTE
Each 40GE port has a single-color indicator, which shows the status
of the 40GE port by default.
If a 40GE port is not split and is connected to four 10GE ports on a
remote device using a one-to-four high-speed cable, the 40GE port
cannot go Up and its indicator is off.
- Off: 40GE ports are not split into four 10GE ports.
2 Chassis
Table 2-8.
Table 2-8.
72