Patient Set-Up - EDAN Acclarix LX4 User Manual

Acclarix LX4 Diagnostic Ultrasound System User Manual
Button F1/F2
Scale Unit
Mute
Video Mode
FootSwitch
Measure Unit
Hide non
intra-operative
indicator for
L17-7SD
Follicle Method
Cyst Method
3D/4D

9.1.2. Patient Set-up

Color, PDI, DPDI, Needle, 3D,
4D, Store 3D data set, Store
4D data set.
cm/s, kHz
√/×
PAL/NTSC
Freeze/Store1/Store2/Print
mm, cm
2 2
mm , cm
3 3
mm , cm
√/×
1 Distance
2 Distances
3 Distances
3D
4D
Table 9-1 General Set-up Description
Figure 9-2 Patient Set-up Screen
Define the F1/F2 keys, select one of the
pull-down options. The options that are
available will depend on what functions are
enabled on the system.
Set the velocity units of spectrum scale
Set the system volume.
Set the output video mode, the selected video
mode should be the same as that of the
s-video printer, otherwise the printer can not
work.
Set a function for the left key or right key of
FootSwitch. If the physical footswitch only has
one button then the Left button selection
applies.
Set the default unit of distance, area and
volume measurement.
Set whether to hide the hint of "non
intra-operative"
L17-7SD.
Set how many distances are supported to
measure when measuring follicle/Cyst volume.
Set the function of 3D/4D hardkey -- to activate
3D or 4D mode.
- 119 -
while using transducer
Utilities