4D Dataset - EDAN Acclarix LX4 User Manual

Acclarix LX4 Diagnostic Ultrasound System User Manual
Touch screen controls are the same as that of static 3D except for Cine button.
Name Control
cine
5.8.7. 3D/4D Dataset
This system supports storing 3D and 4D datasets for reviewing and re-editing. All operations and
functions of 3D and 4D image review can be supported.
Storing 3D/4D Dataset:
Press the Freeze key on the console first, then press Store1, Store2, Print, F1 or F2 key on the
console (depended on the function of these four keys configured in Set-up page. See Section 9.1.1
General Set-up and Section 9.1.3 Store/Print Set-up for details),and a thumbnail labeled as "3D"
or "4D" is displayed at the right side of the display screen indicating that the 3D/4D dataset has
been stored.
Note:
3D/4D Dataset can only be stored in frozen status.
Reviewing 3D/4D Dataset:
The way to review 3D/4D dataset is the same as that used to review static image or clip. See
Section 7.4.2 and Section 7.4.3 for details.
Re-editing 3D/4D dataset:
Press 3D/4D button on the review touch screen or press Set key when a thumbnail of 3D/4D
dataset is selected in review status, this system will enter 3D or 4D mode, allowing you to re-edit
3D/4D dataset. Then all controls and features supported after 3D/4D acquisition are available.
Description
Switch between 3D and 4D review state
Table 5-10 4D Touch Screen
- 65 -
Imaging