Reviewing Images - EDAN Acclarix LX4 User Manual

Acclarix LX4 Diagnostic Ultrasound System User Manual
clip or until the clip store is interrupted. The following events can cause the clip store to
stop:
 A second press of the button
 Display of a GUI screen or dialog
 Mode change
 Reaching a pre-defined clip duration (refer to System Setup)
 Image parameters change (depth and zoom in B/C mode, M cursor, sweep speed, strip
size and depth in M mode, angle, scale, baseline, invert, strip size and sweep speed in
Strip Doppler mode.)
 Cine play pause (press Freeze button or Set button)
NOTE：In panorama mode, the stored image by pressing store key is always a
static image.

7.4.2. Reviewing Images

If Static or Clip images have been stored for the current exam then they can be reviewed by
pressing the Review hard key on the console.
NOTE: If nothing has been stored in the current exam then the Review hard key will
invoke the Patient Database function (see the next section).
Figure 7-9 shows an example touch screen for Review. The following table explains the action of
each button in Review.
Button
Page
Speed
L.Margin
Figure 7-9 Review Screen
Description
Change the display one page at a time.
Change the playing speed of the highlighted clip; the speed range is
12.5%-100%, in increments of 12.5%.The default speed is 50%.
Change the left margin of a highlighted clip
- 93 -
Features