Network - HIKVISION KH6 Series Configuration Manual

Network Indoor Station Configuration Guide
Figure 2-17 Incoming Call Linkage
2. Enable and select triggers.
When the calling incoming, the alarm you linked will be triggered.
Relay
Click Relay. Select a relay and click " " and set the relay name and output delay
time. Click Save to save the settings.

2.4.3 Network

Local Network Configuration
Steps
1. Click Local Network Configuration to enter local network configuration page.
Figure 2-18 Local Network Configuration
2. Enter the local IP address, subnet mask, gateway address, and port No.
3. Click Save to enable the settings.
32