System Maintenance - HIKVISION KH6 Series Configuration Manual

4. Tap Restore All to restore all parameters and reboot the system.

1.8 System Maintenance

You can format or install TF card, clear the screen, view the version information of
the indoor station and reboot the system on the system maintenance page.
Tap Settings →
Password
Create the device unlock password and the duress code
Unlock
Create the indoor station's unlock password. If the device has connected to a
lock, enter the password to unlock.
Duress Code
When you are hijacked and forced to open the door, you can enter the
configured duress code. An alarm will be triggered to notify the
management center secretly.
Note
The duress code and the unlock password cannot be the same.
Time and Date
You can set the displayed time and date format, current time. You can also tap
Sync Time and enable NTP to synchronize the device time.
Network Indoor Station Configuration Guide
to enter the general settings page.
Figure 1-11 General Settings Page
13