Synchronize Time - HIKVISION KH6 Series Configuration Manual

You can create and edit the arm/disarm password, duress code and unlock password
of the indoor station.
Steps
1. Tap Settings →
2. Tap Arm/Disarm, Unlock or Duress Code to pop up the password settings dialog
box.
Arm/Disarm
The password is for arming or disarming the zone for the indoor station.
Note
By default, the Arm/Disarm page is hidden. Tap Settings →
Settings and enable Alarm. And the Arm/Disarm page will be displayed.
Unlock
Create the indoor station's unlock password. If the device has connected to a
lock, enter the password to unlock.
Duress Code
When you are hijacked and forced to open the door, you can enter the
duress code. An alarm will be triggered to notify the management center
secretly.
Note
The duress code and the unlock password cannot be the same.
3. Enter the old password.
4. Create a new password and confirm it.
5. Tap OK to save the settings.

1.4 Synchronize Time

Steps
1. Tap Settings →
synchronization page.
Network Indoor Station Configuration Guide
→ Password to enter the password settings page.
→ Time and Date → Sync Time to enter the time
9
→ Shortcut