2. Enable Enable NTP.
3. Set the synchronizing interval, enter the IP address/domain of NTP server and
port No., and select the time zone.
Note
•
The default unit of synchronizing interval is minute.
•
The time zone can be configured as well if the NTP is not enabled.
1.5 Sound Settings
Set the ringtone sound and the volume.
1.5.1 Call Settings
You can set the ringtone, ring duration, call forwarding time on call settings page.
Steps
1. Tap Settings →
Network Indoor Station Configuration Guide
Figure 1-8 Time Synchronization
to enter the call settings page.
10