Add Camera; Zone And Alarm Settings - HIKVISION KH6 Series Configuration Manual

2) Enable Enable Standard SIP.
3) Tap VOIP Account Settings and configure the account information, including
the user name, the phone number, the registered user name, the password,
the domain, the port No,, and the expiration date.
Note
Up to 32 characters are allowed in the user name.

1.2.5 Add Camera

Steps
1. Tap Settings →
2. Tap
to enter the device management page.
3. Tap + to pop up the dialog box.
4. Select HIK Protocol and you can add the camera depended on the HIK protocol.
5. Enter the device name and IP address.
6. Enter the device user name and the password of the camera.
7. Exit the page to save the settings.

1.2.6 Zone and Alarm Settings

Zone Settings
You can set the zone type, alarm type and delay time and other parameters of 8
zones.
Before You Start
Tap Settings →
Steps
Note
Arming status page and zone settings page are hidden by default. You should enable
alarm function first.
1. Tap Settings →
Network Indoor Station Configuration Guide
→ Configuration , and enter admin (activation) password.
→ Shortcut Settings , and enable Alarm.
→ Zone Settings to enter the zone settings page.
6