Before You Start
Tap Settings →
Steps
Note
On the home page, the arming status function and zone settings function are hidden
by default. You should enable the alarm function first.
1. Back to the home page, tap Settings →
mode settings page.
2. Tap Stay Mode, Away Mode, Sleeping Mode, or Custom to enter the page.
3. Arm the selected zone.
Note
•
Zones are configurable on the arming mode page.
•
24H alarm zone including smoke detector zone and gas detector zone will be
triggered even if they are disabled.
•
Arming mode settings should be configured with the settings of arming
status on the user page of the device.
1.3 Password Settings
Network Indoor Station Configuration Guide
→ Shortcut Settings to enable Alarm.
Figure 1-7 Arming Mode Settings
→ Scene Settings to enter the arming
8