Table of Contents
Advertisement
Installation
Unpacking and Inspection
1. Inspect shipping carton for obvious signs of mishandling.
Measurements between
centerlines of panel
2. After removing the controller from the shipping carton,
cutouts are the minimum
inspect it carefully for damage. Never attempt to install
recommended.
and use a damaged unit.
3. Verify that the ordering code number indicated on the side
of the controller matches what was ordered.
Figure 1.
Recommended Panel Layout for Multiple Controllers
C
L
1
C L
2.850" (72.4 mm)
C L
2.150" (54.6 mm)
C
L
Advertisement
Table of Contents
