Table of Contents
Advertisement
Introduction
1
SECTION 1 - INTRODUCTION
The model OS136A series is a very low-cost, super-compact infrared transmitter.
It measures temperature via non-contact, and provides an analog output
proportional to the measured temperature. The OS136A series is offered in two
temperature ranges: -18 to 204ºC (0 to 400ºF) and 149 to 538ºC (300 to 1000ºF).
The analog output is offered as 4 to 20 mA, 0 to 5 Vdc, 0 to 10 Vdc, 10 mV/
Degree C or F, or K type thermocouple.
The unit has a fixed Emissivity of 0.95 which makes it easy to measure
temperature, requiring no adjustments during installation and use.
The super-compact design, 19 mm OD x 89 mm Length (0.75 OD x 3.5" L) is ideal
to measure temperature in confined, and hard to reach places. The Stainless Steel
housing is NEMA-4 rated. The unit comes with a 1.82 m (6') shielded cable as
standard.
SECTION 2 – INSTALLATION
2.1 – Unpacking
Remove the packing list and verify that you have received all your equipment. If
you have any questions about the shipment, please call the Customer Service at:
1-800-622-2378 or 203-359-2208. We can also be reached on the internet at
omega.com
email: cservice@omega.com
When you receive the shipment, inspect the container and the equipment for any
signs of damage. Note any evidence of rough handling in transit. Immediately
report any damage to the shipping agent.
The following items are supplied in the box:
• The infrared transmitter, OS136A with the 1.82 m (6') shielded cable.
• Two Mounting Nuts
• User's Guide
1
The carrier will not honor any damage claims unless all
the shipping materials are saved for inspection. After
examination and removing contents, save packing material
and carton in the event reshipment is necessary.
NOTE:
Advertisement
Table of Contents
