Omega CN8200 Series User Manual page 25

Quick-Helps
2. To enter Standby operating mode: (cont.)
From Security Level Menu:
3. To escape from Standby
operating mode:
4. To initiate Autotuning:
5. To abort Autotuning
and return to normal
operation:
6. To enter FOP (Manual)
operating mode:
7. To escape from FOP
(Manual) operating mode:
Press PV + SV
Press and hold
for 3 sec.
Press
Press + PV + SV
Action Display
Press and hold
for 3 sec.
Press
Press PV + SV
Action Display
Enter Standby
operating mode
(See Quick-Help #2)
Press
Press
Press + PV + SV
Action Display
Press and hold
for 3 sec.
Press
Press PV + SV
Action Display
Press and hold
for 3 sec.
Press + PV +
% of Power
Value
Press
to set new
% of Power Value
Press to + PV +
set % of Power % of Power
for Output 2 Value
if desired.
Action Display
Press and hold
for 3 sec.
Press
40
Press PV + SV
IEC
Requirements
USE OF THIS EQUIPMENT IN A MANNER NOT SPECIFIED BY
THE MANUFACTURER MAY IMPAIR PROTECTION PROVIDED
BY THE EQUIPMENT!
The maximum supply current is line voltage dependent:
230 mA for a 24 Vac/dc input
60 mA for an 85-250 Vac input
Output Specifications
Output Type
R
T
DC
CLEANING INSTRUCTIONS
1. Remove power from the unit prior to any cleaning operation.
2. Use a cotton cloth to gently and sparingly apply isopropyl
alcohol only. Do not use cleaners or other solvents as they may
damage the unit.
3. Allow the unit to dry completely prior to reapplying power.
41
fuse rating=700 mA
fuse rating=100 mA
Max current Voltage Leakage
5 A 250 Vac 1000 M ohms
1 A 250 Vpk 1 mA
20 mA 5 V NA