Table of Contents
Advertisement
1.8 Special instructions
When using compressed air, do not direct the jet
towards your body. Air can penetrate into the blood
circulation, which means mortal danger.
Use hearing protection when test running.
Bar, chain and drive wheel cover must be assem-
bled before the saw is started.
Insufficient chain lubrication can result in chain
breakage, which can cause serious or even fatal
injury.
Check that the brake is applied when removing the
compression spring on the chain brake. Otherwise
the pressure spring can fly out and cause personal
injury.
Check the chain brake after repair work, see
"Assembling chain brake/Function check".
Check the chain catcher and replace it if it is dam-
aged.
1.9 Symbols on the saw
The symbols below are embedded on the chain
saw.
Filling with chain oil
Indication of chain direction
Chain brake
Introduction and safety instructions
1.10 Symbols in the Workshop Manual
This symbol warns of personal injury
when the instructions are not followed.
Use protective gloves.
Use protective goggles.
5
English –
Advertisement
Table of Contents
