Husqvarna 414EL Workshop Manual page 16

Disassembly/ Assembly
6
Fit the Spiral bevel gear on the Armature.
7
Mount the M8 Hex nut and tighten with tightening
Torque 7.4-15 Nm.
8
Mount the Armature in the Motor housing.
9
Assemble Motor housing to Gear housing.
10
Fit and tighten the four Tappening screws 5x25.
Use a longer reach screwdriver.
11
Assemble the Carbon brushes and Brush holder
caps on the machine.
16 –
English