Safety; Safety Definitions; General Safety Instructions; Symbols On The Product - Husqvarna 340i Workshop Manual

2.1 Safety definitions

Warnings, cautions and notes are used to point out
specially important parts of the manual.
WARNING: Used if there is a risk of injury or
death for the operator or bystanders if the
instructions in the manual are not obeyed.
CAUTION: Used if there is a risk of damage to
the product, other materials or the adjacent area
if the instructions in the manual are not obeyed.
Note: Used to give more information that is necessary in
a given situation.

2.2 General safety instructions

WARNING: Apply a new warning label if a
warning symbol on the product is damaged or
missing.

2.3 Symbols on the product

Fill with chain oil
Start/Stop
savE / Battery save mode
Warning lamp/Fault indicator
Indication of chain direction
Chain brake

2.4 Special safety instructions

2.4.1 To remove the battery
WARNING: Always remove the battery before
you do repairs or do servicing on the product.

4 - Safety

2 Safety
WARNING: Do not put the battery back until the
product is assembled.
1. Press in the catches and remove the battery.
2.4.2 Cutting equipment safety
WARNING: Always remove the cutting
equipment before you do repairs or do servicing
on the product.
WARNING: Do not install the cutting equipment
until the product is assembled.
1435 - 001 - 11.06.2020