Husqvarna 414EL Workshop Manual page 21

ASSEMBLING
1
Fit the Brake band on the Bearing hosing.
2
Fit and tighten the Tapping screw 4x12 with Wash-
er 4.
3
Pass the Compression spring 9 through Link plate
complete.
4
Mount the Link plate complete to Beraing housing.
5
Hook the end of Brake band to the hook of Link
plate complete.
6
Mount the round hole of Link plate complete to
the pin portion of Bearing housing. Push the plate
deeply until it stops.
7
Pinch the hook of Link plate complete and the rib
of Bearing housing to free Link plate from Bear-
ing housing so that Link plate complete is in "Saw
chain brake released" position.
8
Fit the O ring 6 on the Gear housing.
9
Assemble Bearing housing to Gear housing.
Disassembly/ Assembly
21
English –