Husqvarna 414EL Workshop Manual page 15

Disassembly/ Assembly
ASSEMBLING
1
Fit the Brake drum assembly on Spindle and Spiral
bevel gear 37.
2
Fit the Flat washer 8 and Retaining ring E type 6
on the Spindle.
3
Assemble Bearing housing to Gear housing.
4
Press Ball bearing 629ZZ on the Armature with an
arbor press and a press tool for ball bearings
5
Press Ball bearing 6301LLB on the Armature with
an arbor press and a press tool for ball bearings.
15
English –