Husqvarna 414EL Workshop Manual page 11

Note:
Fit the compression spring 6 on the Front hand
guard.
7
Fit the Boss of Front hand guard complete into the
concave of Rod.
8
Assemble the Front hand guard complete to Gear
housing.
9
Fit the Connector A to Oil tank.
Oil tank view fom Gear housing cover side.
Hose of Connector A has to be connected to Oil
tank so that the flat portion of Connector A faces
toward Gear housing cover side.
Clamp the hose of Connector A with Hose clamp
B while facing the tap of Hose clamp toward Gear
housing cover side.
10
Assemble the Oil tank in the Gear housing.
11
Fit the Connectors A and B to the nipples of Oil
pump complete.
Disassembly/ Assemblyt
Tabs of
Hose clamp
B
A
11
English –