Warnings On The Regulator - Samson 41-23 Mounting And Operating Instructions

1.4 Warnings on the regulator

Warning
Attention ! Warning to indicate that the set point springs are
Do not loaded.
disassemble the There is a risk of serious head or face injury through the
valve without sudden release of the set point springs while unscrewing
relieving the the crossbeam when the set point springs are loaded.
tension from the
set point spring.
Completely relieve Warning to indicate that the set point springs are
the tension from loaded.
the set point There is a risk of injury to hands or fingers through the
springs before sudden release of the actuator stem if they are inserted
unthreading the between the crossbeam and set point springs while ex-
two nuts. changing the actuator.
Warning to indicate property damage at the bellows
seal.
Unlock/unlock the
There is a risk of damage to the bellows seal due to the
plug stem
incorrect mounting or removal of the plug stem.
EB 2512 EN
Meaning of the warning
Safety instructions and measures
Location on the device
1-9