Outer Rack Rails - Supero SC825 Series User Manual

SC825 Chassis Manual
1
1
1
2
Figure 6-3. Assembling the Outer Rails

Outer Rack Rails

Outer rails attach to the rack and hold the chassis in place. The outer rails for the
SC825 chassis extend between 30 inches and 33 inches.
Installing the Outer Rails to the Rack
1. Secure the back end of the outer rail to the rack, using the screws provided.
2. Press the button where the two outer rails are joined to retract the smaller
outer rail.
3. Hang the hooks of the rails onto the rack holes and if desired, use screws to
secure the front of the outer rail onto the rack.
4. Repeat steps 1-3 for the remaining outer rail.
1
3
screw the handles the
outer rails for secure
purpose if necessary
6-6
F.
SCREW
1
SCREW
2
COMPLETE
Note: figures are for illustrative purposes only. Always install servers into racks
from the bottom up.
Installing the Chassis into a Rack
1. Extend the outer rails as illustrated above.
2. Align the inner rails of the chassis with the outer rails on the rack.
SCREW
3. Slide the inner rails into the outer rails, keeping the pressure even on both
sides. When the chassis has been pushed completely into the rack, it should
screw the handles the
outer rails for secure
click into the locked position.
purpose if necessary
4. Optional screws may be used to secure the to hold the front of the chassis to
the rack.
ABLECOM
DATE:2008/08/14
REV:2
Figure 6-4. Installing the Chassis into the Rack
COMPLETE
6-7
Chapter 6: Rack Installation
ABLECOM
DATE:2008/08/14
REV:2