Summary Of Dv-Dosc Applications; Figure 4: Flown And Stacked Dv-Dosc , Dv-Sub Configurations - L-Acoustics dV-DOSC Operator's Manual

Summary of dV-DOSC Applications

As a full range two-way system, dV-DOSC can be used for speech reinforcement in corporate
applications, houses-of-worship, television or theatrical productions. In some cases, dV-DOSC can be
used standalone for limited bandwidth musical reinforcement (note: for extended bandwidth sound
reinforcement, the use of subwoofers is recommended). Another possibility is the use of dV-DOSC in
A/B systems for theatre. The compact profile of dV-DOSC is ideal for such installations where visually
unobtrusive sound design is an important issue and a small enclosure is required.
dV-DOSC is also well-suited to large scale fixed installations such as multiple distributed arrays for
stadium and arena sound reinforcement. For these applications, the generous 120 degree horizontal
coverage combined with the seamless transition between short to long throw zones obtained using
Wavefront Sculpture principles allows the sound designer to achieve excellent intelligibility and cost
effective coverage even under difficult, highly reverberant acoustic conditions.
When combined with subwoofers for extended bandwidth applications, dV-DOSC can be used as a
FOH system for small, medium and large venues. For these applications, the 120 horizontal coverage
provides excellent stereo imaging in the standard left-right format while the flexibility provided by
Wavefront Sculpture allows the sound designer to cover virtually any room geometry. The compact
size of dV-DOSC also opens up the possibility for adding a center cluster for LCR reproduction and
depending on room geometry, dV-DOSC can be used exclusively for all LCR channels or as a center
cluster in conjunction with ARCS, KUDO or V-DOSC FOH L/R systems.
For touring applications, dV-DOSC can be used as a downfill enclosure for flying under V-DOSC or as
a long-throw or upfill extension of the system when stacked on top of the V-DOSC rigging bumper.
Other applications for use with V-DOSC include stacked stereo infill or distributed front fill systems
and flown center cluster or offstage fill dV-DOSC arrays. When operated in conjunction with
subwoofers, dV-DOSC can be used for flown or stacked monitor side fill and also for drum monitor
applications in either horizontal or vertical orientations.

Figure 4: Flown and stacked dV-DOSC , dV-SUB configurations

15
dV-DOSC dV-SUB Manual V3.0 June 2005