Unpacking; Standart Package Of Components - Salda VEGA Series Manual

Only a product placed on a pallet may be lifted in order to prevent damage to the casing.

10. UNPACKING

Accessories may be packed together with the product. Prior to transporting the unit, first unpack the accessories.
• Remove the film from the unit.
• Remove the bracing packaging tape which keeps the protective profiles.
• Remove the protective profiles.
•After unpacking the unit, examine it to make sure that it it has not been damaged during transportation. The installation of damaged units is
prohibited!
• Verify that all ordered equipment are delivered before starting the installation. Any deviation from the ordered equipment must be reported to the
supplier of products.

11. STANDART PACKAGE OF COMPONENTS

1 2
Amortization pads with
hanging bracket
4 pcs.
(VEGA 350E/700E)
6 pcs.
(VEGA 1100 E/W)
8 | EN
Figure. 9.1.
4 1
1 2 3
Screws M5x16 DIN 7985,
3 4
spring washers 5 DIN 127,
washers 5 DIN 440R
8 sets
(VEGA 350E/700E)
12 sets
(VEGA 1100 E/W)
Lifting with forklift.
2 3 4
1
Outdoor air sensor TL
Supply air sensor TJ
1 pcs.
2 3 4
Filter pressure switch
1 pcs.
(VEGA 1100W)
1 pcs.
VEGA v2019.06