Unpacking - Salda AMBERAIR COMPACT RH Series Mounting And Installation Instruction

The product is heavy. Exercise caution when transporting and installing.
Dimensions, [mm]
H
2480
* - Extended rotor section pallet lenght
The product can be lifted with a forklift or a crane using slings.
When lifting with a forklift, the length of the fork must be greater than the length or width of the product (depending on the product version).
When lifting the product with slings, it is necessary to insert spacers between them in order to prevent damage to the casing of the product.

5.3. UNPACKING

• Remove the film from the unit.
• Remove the bracing packaging tape which keeps the protective profiles.
• Remove the protective profiles.
• Unscrew the wood screws which fasten the unit legs to the pallet.
• After unpacking the unit, examine it to make sure that it it has not been damaged during transportation. The installation of damaged units is
prohibited!
• Verify that all ordered equipment are delivered before starting the installation. Any deviation from the ordered equipment must be reported to
the supplier of products.
12 | EN
W W*
2150 2350
Figure 5.2.1 - AmberAir Compact lifting with a forklift
Figure 5.2.2 - AmberAir Compact lifting with slings
W/W*
L1 L2
830 830
AMBERAIR COMPACT RH v2019.08
L3
1000