Toro CM-1258Y-SD Operator's Manual page 30

Draining the Fuel Tank and Replacing
the Outlet Fuel Filter
Service Interval: Every 200 hours—Replace the outlet-fuel
filter.
1. Stop the engine and wait for all moving parts to stop.
2. Place an approved container under the fuel tank to
collect the fuel.
3. Remove the fuel cap
1
2
3
Figure 40
1. Fuel cap
2. Gasket
4. Remove the drain plug and gasket to drain the fuel
(Figure 40).
5. Loosen the nuts under the fuel-shutoff lever
41).
1
2
3
4
5
6
Figure 41
1. Outlet-fuel filter
2. Gasket
3. Filler port
6. Remove and discard the O-ring
(Figure 40).
3. Drain plug
(Figure
G021307
4. O-ring
5. Fuel-shutoff lever
6. Nut
(Figure 41).
7. Pull the outlet-fuel filter and gasket out of the filler
port (Figure
8. Install a new outlet-fuel filter and gasket through the
filler port, and seat them in the fuel tank
9. Install a new O-ring on the fuel-shutoff lever, and
install the assembly to the fuel tank using the nuts
under the fuel-shutoff lever
10. Install the drain plug with a new gasket
11. Install the fuel cap and hand tighten it.
Note: Overtightening the fuel cap will damage it.
G02131 1
30
41).
(Figure 41).
(Figure 41).
(Figure 40).