Toro CM-1258Y-SD Operator's Manual page 10

Engine Controls
1
8 9
7
6
5
4
10
13
12
1. Fuel drain plug
2. Air cleaner
3. Recoil-start handle
4. Oilcap / dipstick
5. Engine-speed-control
knob
6. Fuel-injection pump
7. Fuel-shutoff lever
Figure 6
8. Fuel tank
9. Fuel cap
10. Decompression lever
11. Oil filter
12. Oil-drain plug
13. Oilcap / dipstick
Engine Speed Control Handle
The engine-speed-control handle
2
operator to start and stop the engine. It is located on the
engine cowl, and is connected to the engine-speed-control
knob, which is located on the engine
the engine-speed-control handle:
1. Rotate the engine-speed-control handle
counterclockwise to unlock it.
2. Pull it all the way out and lock it by rotating it clockwise.
3. Rotate it counterclockwise and push it in to stop the
engine.
Note: The speed-control knob on the engine must be
loose (rotated counterclockwise) for the cowl-mounted
3
speed-control handle to work.
1. Engine-speed-control handle
11
g020004
10
(Figure 7) allows the
(Figure 8). To control
Figure 7