Weld Screen; Weld Screen Buttons; Jog Screen - Lincoln Electric APEX 3 Series Operator's Manual

APEX ® 3 SERIES TIG PENDANT MANUAL

Weld Screen

During the weld, the screen will show voltage and
amperage feedback on the screen – see FIGURE 12 –
Weld Screen Options. Pressing the menu buttons will
move the operator through the Menu Option Variables
similar to FIGURE 11 - All Test Screens.
FIGURE 12 - Weld Screen Options
Autoheight and Wire Feed can also be engaged or
disengaged – see FIGURE 13 - Weld Screen Options
Disengaged.
FIGURE 13 - Weld Screen Options Disengaged

Weld Screen Buttons

The Weld Screen buttons work similar to the Idle
screen buttons – see examples on page 20.
Pressing the Start/Stop button during the weld halts
the weld and moves into the Jog Menu.

Jog Screen

The Jog Screen is used to test movement of the
system before welding. The Jog Screen can be entered
from the Idle or Oscillation screens.
From the Idle Screen – see FIGURE 14 - Idle Screen –
press and hold the Wire Feed/Amps or the Travel/Volt-
age menu buttons to enter the Jog Menu.
FIGURE 14 - Idle Screen
The FIGURE 15 - Jog Mode Screen – provides for
moving the weld head along the track, adjusting torch
height, purging gas and shows the icons for both.
FIGURE 15 - Jog Mode Screen
Press the "Exit" selection button to return Idle screen.
A-22
OPERATION