Saving Program Updates - Lincoln Electric APEX 3 Series Operator's Manual

APEX ® 3 SERIES TIG PENDANT MANUAL
For this example the pass has been named 1Root.
Continue to save programs to this base until the
required passes are all saved.
After saving the required passes they are all displayed
under the base – see FIGURE 46 – Full Program Base.

Saving Program Updates

A fourth level selection is available when changes are
made to Program Passes associated with a Program
Base.
FIGURE 46 - Full Program Base
When changes have been made to one or more Pro-
gram Passes and the Program Base containing the
changed Program Passes is selected and the SAVE
button is pressed, the Program Update option
becomes available on the SAVE screen.
If changes were made to one or all of the Program
Passes associated with the Program Base "Steel 2in
Pipe", selecting the Program Base and pressing the
SAVE button would product the following screen:
Selecting Program Update and pressing the OK
button on this screen will save the changes made to all
Program Passes at one time rather than requiring each
Program Pass to be saved separately.
A-47
OPERATION