Hide Program Passes; Saving To A Usb - Lincoln Electric APEX 3 Series Operator's Manual

APEX ® 3 SERIES TIG PENDANT MANUAL

Hide Program Passes

The passes in a program base can be hidden by
highlighting the program base and pressing the
steering knob, collapsing the group. Press the steering
knob again and it will re-expand.

Saving to a USB

All of the examples shown have been saved locally to
the pendant. They can also be saved to a USB.
The USB has a folder set up specifically to save or
read files. If this folder is missing then a prompt will
appear on the screen – see FIGURE 47 - USB Folder
Notification.
FIGURE 47 - USB Folder Notification
If the flash drive is new, the system will create a folder
once the pendant operator presses "Ok".
To access files already saved on the USB, move them
to the specified directory.
Note: A USB file name is restricted to 8 characters.
Local files can be up to 16 characters. The only
program name blocked is "Lincoln".
A-48
OPERATION