Idle Screen Buttons - Lincoln Electric APEX 3 Series Operator's Manual

APEX ® 3 SERIES TIG PENDANT MANUAL
Pressing the menu button above opens the Travel/Volt-
age Menu Options.
If the Volts Peak value is included in the weld variable
configuration as shown, the Idle Screen shows the
Travel value with the Volts Peak value.
For each of the Menu Option Screens, the variables
shown on the screen can be changed using the left
and right toggles. These changes can be made while
idle or welding.

Idle Screen Buttons

The Idle Screen – see FIGURE 8 - Idle Screen Default
– will change depending on which menu button has
been selected. Some items in the Selection button win-
dows will change depending on system configurations.
1. AUTO HEIGHT -
• Short Press - Turns Auto Height on and off
2. SETUP -
• Short Press - Navigates to the Setup Screen
3. PASS -
• Short Press - Switches to the next pass in the
weld program (if available)
4. WIRE FEED -
• Short Press - Enables or disables wire feeding.
5. TEST/WELD -
• Short Press - Switches between weld and test
modes (FIGURE 8 shows system in Weld Mode)
6. LEFT TOGGLE (White Border) -
• Short Press - Changes the value displayed in
the top left box. In the example, FIGURE 8 - Idle
Screen Default – the value will change in the left
dwell box)
FIGURE 8 - Idle Screen Default
7. STEERING KNOB -
• Rotate - Moves the oscillation in and out
• Short Press - Centers the oscillation
• Long Press - Starts/stops oscillation test
8. RIGHT TOGGLE (Gray Border) -
• Short Press - Changes the value displayed in the
top right box (in the example above, FIGURE 8
– Idle Screen Default, it will change the value in
the right dwell box)
9. WIRE FEED/AMPS -
• Short Press - Wire Feed/Amps options
• Long Press - Navigates to the Jog Screen
10. DWELL -
• Short Press - Dwell options
• Long Press - Navigates to the Dwell Jog Screen
A-19
OPERATION