Deleting Users; Changing User Access - Lincoln Electric APEX 3 Series Operator's Manual

APEX ® 3 SERIES TIG PENDANT MANUAL
Once you have chosen the appropriate User code and
level of access, select OK. Reset will change charac-
ters back to "0000".

Deleting Users

Press the Delete Selection Button after selecting a user
from the list.
Deleting a user account will bring up a warning screen.
Press the Detail Selection button to see more informa-
tion about the shown screen.
CAUTION: DELETING ALL SUPERVISORS WILL
REQUIRE A FACTORY RESET. PLEASE CONTACT
THE FACTORY FOR INSTRUCTIONS.
The warning screen allows the user the chance to re-
view what is being deleted. The warning screen shows
the level of access and the user code. In this instance
it is USER: 0008. If this User Code had Supervisory ac-
cess the screen would read, SUPERVISOR: 0008.
If there are too many users to fit on the screen the last
box will contain ellipses, see FIGURE 42 - Multiple
Users. This indicates that there are additional system
users. At the bottom of the fields it will tell how many
user codes are currently listed in the system.
FIGURE 42 - Multiple Users

Changing User Access

To change the level of access that a user has been
granted, press the ADD selection button. Instead of
entering a unique user code, add in the existing user
code that needs to be changed. With "Level" highlight-
ed choose the new access level.
A-42
OPERATION