Hmi Control Display - Overview - Ozone Solutions Waterzone Series Installation & Operation Manual

Ozone injection system
Hide thumbs Also See for Waterzone Series:
Table of Contents

Advertisement

vent along with the air. If adequate off-gassing does
not occur, the tank will eventually fill with oxygen/
ozone gas and cause injection pump cavitation and
result in low dissolved ozone levels. It may take a
matter of minutes or hours for such a problem to
become obvious.
10. The Variable Ozone Output may be turned up at this
time to begin producing ozone. IMPORTANT: Verify
that the water chiller is turned on and operating
before producing ozone.
11. The Dissolved Ozone Level on the Dissolved Ozone
Monitor should being to rise within five (5) minutes
of startup. NOTE: The dissolved ozone sensor will
SECTION 4

HMI CONTROL DISPLAY - OVERVIEW

Displays measured compressed
air pressure
Brings up Component Control
Screen for inlet ball valve
Brings up Component Control
Screen for oxygen concentrators
Displays ozone inverter output
level setting, changeable in the
Set Point Screen
Brings up Component Control
Screen for ozone inverters
Displays current system status
and automated process step
12. Depending on the application, the Dissolved Ozone
13. To stop the system simply press the STOP button
Displays measured
Displays measured
compressed oxygen
compressed ozone
pressure
pressure
Displays Hour Meter
Brings up the Alarm
of system running
Screen
require time to stabilize in the process before full
accuracy is reached. Normally this occurs within a
few hours, but may require more time. See AS-500,
AV88, Q45H, or Q46H Dissolved Ozone Monitor
and Sensor operation manuals for details.
Monitor settings may need to be adjusted for the
HIGH and LOW alarms. See the System Operation
section of this manual.
on the screen. The system will automatically enter
a flush cycle then shut down.
Brings up the Trend
Brings up the Set
Screen
Point Screen
INSTALLATION & OPERATIONS MANUAL
Displays measured remote
ozone level in ambient air
Displays measured
dissolved ozone level at
tank outflow
Brings up Component
Control Screen for the
injection pump
WZ SERIES
/
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wz-100Wz-150Wz-200

Table of Contents