Ozone Solutions Waterzone Series Installation & Operation Manual page 5

into the venturi. This forceful action along with the
added mixing vanes in the venturi injector provides for
an extremely efficient method of dissolving the ozone
gas into water.
Naturally, the excess oxygen and a small amount of
undissolved ozone must be removed from the water;
this occurs in the contact tank located on the skid.
Baffles inside this skid ensure that no oxygen/ozone
gas will escape with the water. All of the undissolved
Air Intake
Filter
OPTIONAL AIR
COMPRESSOR
Items shown in dashed line are
assembled onto one skid
Oxygen Concentrator
AIR O2
IN OUT
Cooling Water Lines
Water Chiller
oxygen/ozone is removed through the vent on the top
of the contact tank so that it can be safely destroyed or
removed from the location.
The water passing through the ozone injection system is
unimpeded and will flow at the desired rate at the point
of use. Water with dissolved ozone levels necessary
for proper disinfection can be used for any purpose
desired.
OZONE GENERATOR
(Water Cooled)
Ozone
Gas
Untreated Water +
Ozone
Venturi Injector
Untreated Water
Injection Pump
INSTALLATION & OPERATIONS MANUAL
Heated Ozone
Destruct Unit
Undissolved Ozone
Gas
Dissolved Ozone
Water
Contact
Tank
Untreated Water In
To Atmosphere
To Drain
Monitor
Treated Water +
Ozone Out
WZ SERIES / 5